Leading 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.
Leading 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.
Blog Article
Don't take too lightly the forklift at the office. If the procedure is bad, there will certainly be significant accidents in minutes, and there are many accidents including forklifts.
Situation 1: The forklift cargo blocked the motorist's view, and the individual ahead might not be discovered, leading to a rolling mishap.
Situation 2: In order to maintain the balance of the forklift when lifting hefty items, the staff members utilized their body weight as the weight, which virtually created casualties.
Situation 3: The width of the forklift cargo surpasses the allowable width of the course and holds on the roadside rack, which nearly triggers an accident.
Case 4: Forklift is speeding up and surrender during a turn.
Case 5: The forklift driver did not notice the pedestrian, and the pedestrian did not see the forklift.
Instance 6: The forklift lifts the personnel unlawfully, the forklift vehicle driver does not use the seat belt, the forklift lifter drops and the vehicle driver is squashed when the forklift rolls over.
Case 7: The forklift vehicle driver did not use a seat belt and dropped from the automobile when it rolled over and was squashed.
Forklift operation should pay attention to these issues ：.
Begin.
1. Before beginning, observe the surroundings, and after validating that there are no challenges that hinder the safety and security of driving, honk the horn first and after that start.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be safe prior to starting.
3. When the forklift starts with a lots, the chauffeur should initially confirm that the tons is stable and trusted.
4. The start needs to be slow and consistent.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the pole should be tilted in reverse. .
2. Do not lift the fork too expensive when driving. When getting in and leaving the task website or while driving, be careful that there will be no barriers overhead. When the load is taking a trip, the fork must not be increased expensive, which will impact the security of the forklift. .
3. After dumping, the fork should be reduced to the regular driving position before driving. .
4. When turning, if there are pedestrians or lorries close by, the driving signal should be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will trigger the lorry to shed lateral stability and tip over. .
5. When the forklift is downhill, it is strictly prohibited to shut off the fire and slide, and it is restricted to brake suddenly while driving with loads unless there are special conditions.
6. When the forklift is running, it has to obey the traffic rules in the factory and should keep a specific security range from the automobile ahead. .
7. When the forklift is running, the lots must be in the most affordable position that does not hinder the driving, and the gantry should be properly tilted back. The load will not be elevated other than when piling or packing. .
8. The elevation of the tons should not block the chauffeur's sight. In unique conditions, when the thing influences the forward vision, drive at a reduced speed when reversing.
9. It is forbidden to activate the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a low speed when getting in the manufacturing workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for workers to stand on the fork to hold items and play a stabilizing function. .
12. If problems are found, they will certainly be repaired and reported in a timely fashion, and they will certainly never operate with illnesses or hide them.
packing and unloading.
1. When fork-loading things, the distance between both forks ought to be adjusted as required to make the tons of both forks well balanced and not skewed, and one side of the thing ought to be against the shelf. .
2. It is prohibited to work with a solitary fork or use a fork top or draw. In special conditions, security warning signs need to be set up to advise surrounding pedestrians. .
3. In the process of filling and unloading things, the forklift should be stopped with the brake. .
4. The speed of the lorry ought to be slow-moving and consistent. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled objects and harm individuals. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as possible under the tons, and it needs to be noted that the fork pointer ought to not touch various other goods or things. The load must be maintained with minimal back tilt of the gantry to ensure that the lots does not slide in reverse. The pole can be tilted ahead a little when the load is reduced to permit easy placement of the lots and removal of the forks. .
6. It is forbidden to fork products at broadband and ram hard items with the fork head. .
7. When the forklift is functioning, it is restricted for people to stand around the fork, so as to stay clear of the collapse of the goods and injure people. .
8. Overwhelming is forbidden, and it is banned to use forks to lift workers to take part in high-altitude procedures to avoid high-altitude falling mishaps. .
9. It is not enabled to make use of the brake inertia to slide, place, round or roll objects. .
10. It is not allowed to use forks to choose, turn pallet discharge.
Leaving .
1. It is prohibited to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you need to dump the goods or reduced the fork structure.
2. Draw the hand brake take care of to dead or dispirit the hand brake button.
3. The engine is shut off and the power is cut off. (Except for special scenarios, such as the vehicle driver does not leave the lorry's view and does not surpass 1 min).
4. Eliminate the key. .
Forklift Operation Precautions.
1. Before and after the forklift operation, the look should be inspected, and fuel, lubricating oil and air conditioning water need to be included.
2. Check the security efficiency of starting, running and braking.
3. Inspect whether the lights and horn signals are complete and efficient.
4. Throughout the operation of the Stand-on Electric Pallet Stacker forklift, check whether the pressure and temperature level are typical.
5. After the forklift is running, the outside leakage should also be checked and the seals ought to be replaced in time.
Forklift Safety Operation Specifications.
1. You must inspect before leaving the vehicle;.
2. When you run into somebody before you throughout driving, you should send a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the nadir of the cargo must be 0.3 m ~ 0.4 m in the air;.
5. The transforming ought to not be as well sharp to stop the tendency of Electric Forklift Truck for Warehouse " complimentary turning";.
6. Adding and down the slope must be slow and consistent, and no turning on the incline is allowed.
7. Do not drive throughout the gradient. When the gradient is higher than 10%, the car ought to be driven backwards when declining;.
8. When the forklift personnel lug the goods and move on, if they encounter large or heavy products and go to the chauffeur's line of sight, they need to take the turning around exercise
.
The "Eight Prohibitions" must be followed in the operation.
1. Solitary fork procedure is not allowed.
2. It is not enabled to lift the goods for long distance driving.
3. It is not allowed to pick up the goods by passing on the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not enabled to make use of inertia pressure to pick up the goods.
6. It is not allowed to utilize stopping force to expatriation round or easy-to-roll items.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is elevated.
8. Do not drive side to side on inclines
.
Vehicle parking is not permitted under the following problems.
1. Curves, narrow roadways, railway crossings;.
2. Sections with a longitudinal slope more than 5%.
3. When there is an challenge on one side of the road, the opposite side of the section with the same length as the barrier should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844